Sludges deshydratation >
Polymer preparation
Equipment for the preparation of polymer in emulsion form
The BIOTRADE Polymer Preparation solution enables in-line preparation of polymer in emulsion form. The pure emulsion is dosed using a variable flow eccentric rotor pump.
The dilution water supply flow rate is adjustable by a motorized valve controlled by a vortex flowmeter. This makes it possible to vary the rate of dilution and the concentration of the polymer solution prepared.
The pure emulsion is injected through a non-return valve in the dilution water pipe, upstream of the dynamic mixer.
A static mixer, downstream of the dynamic mixer, makes it possible to finalize the homogenization of the prepared solution.
At the outlet of the static mixer, two manual valves allow the injection of the prepared polymer to one or two injection points.
Model
The BIOTRADE polymer preparated solution allows the in-line preparation of 600 to 3000 L / h of diluted polymer.
CHARACTERISTICS
The BiOTRADE polymer preparated solution is composed of the following elements:
- A stainless steel structure
- A pressure regulator
- A motorized solenoid valve
- A vortex flowmeter
- An eccentric rotor pump
- A dynamic mixer
- A static mixer
- A non-return valve
- A dosing pot
ACCESSORIES
- Control box with automaton
(Click here to enlarge )